Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

$9.98 - $18.85
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$25.00
Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: brass - Bottle of 50pcs
$34.60
- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle
$42.50
Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs
$42.50
Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs
$32.99
Hydraulic hose with banjo fitting for TRP brakes.
$32.99
Hydraulic hose with banjo fitting for TRP brakes.
$0.89
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
$1.29
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
$2.09
- Routes cables underneath the bottom bracket - Will not rust or corrode
$2.59
- Rubber - Color: Black
$3.19
- MTB or Road - 1.5 x 1855mm - Galvanized
$3.19 - $7.39
Shifting cables for Road/Mountain bikes.
$3.19
- Steel cable noodle with alloy end caps - Includes plastic liner
$4.19
- Replacement link wire for cantilever brakes
$4.19
- MTB or Road - 1.5 x 2667mm - Galvanized
$5.49
- Fits cantilever brakes - Sold individually
$6.09
- Galvanized steel inner wire - Standard 5mm brake housing - Front or Rear
$6.29
- Galvanized steel inner wire - Standard 5mm S.I.S. housing - Front or Rear - Mountain or road
$6.29
- Galvanized steel inner wire - PTFE lined brake housing - Front or Rear - Mountain or road
$7.39
- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length
$7.39
- For mountain bike cable-actuated brakes - 1.5mm x 3000mm - Stainless steel
$8.39
- Stainless steel shifter cable - PTFE-coated for reduced friction - Length: 2000mm - 1.1mm compatible with Shimano, SRAM, and Campagnolo shifters - 1.2mm compatible with Shimano and SRAM shifters
$9.49
- Complete cable kits for internal three-speed hubs
$23.09
- Flexible linear pull brake guide - Guides cable to brake arm - Bag of 10
$23.99
- 50 feet (15.2 meters) length - 5mm diameter cable housing - For brake cables
$28.19
- 50 feet (15.2 meters) length - 5mm diameter brake cable housing
$32.59
- Multi-strand construction - Length: 25 feet - Size: 4mm
$32.59
- Multi-strand construction - Length: 25 feet - Size: 5mm
$54.19
- Use: Brake - Length: 30mm - Diameter: 5mm
$71.39
- Use: S.I.S. - Length: 30mm
$4.00
- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert
$9.00
- Wet or muddy condition cable sealing solution - 4/6mm
$10.00
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1
$27.00
Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps
$27.00
- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)
$33.99
- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm. - Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355 - Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355 - Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers - Straight connection at lever and caliper
$38.00
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1
$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease
$108.00
Shimano, SLR brake housing, 40m, Black
$130.00
- Brake housing for polymer coated brake cables - Refer to Documents and links to find the right product
$6.00
- Front or rear brake - MTB specific - 1.5mm stainless cable
$6.00 - $9.00
Stainless steel cables are extruded to provide a smooth, low-friction surface.
$6.00 - $7.00
- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable
$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.
$9.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
$15.00
- Front or rear brake compatible - Road specific - 1.5mm polished stainless steel cable
$15.00
- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable
$15.00
Cables are coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Length: 2350mm - Diameter: 1.6mm - Double Ended: No
$19.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$19.00
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$22.00
- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum
$22.00
SRAM's Ferrule Kit is just the thing to keep on hand for your brake- and shift-cable replacement and repairs. You get 10 4mm-diameter aluminum shift ferrules, 6 5mm-diameter aluminum brake ferrules, plus 3 aluminum cable crimps to prevent frayed cables.
$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
$40.00
SRAM's SlickWire MTB Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.
$43.00
Replacement cables and housing for getting your front and rear brakes back up to snuff. Includes; - 1.5mm coated cables (1 x 1350mm, 1 x 2350mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors
$43.00
Includes - 1.5mm coated cables (1 x 850mm, 1 x 1750mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors
$43.90 - $49.90
- Brake casing has internal lining and external plastic coating - Length: 30m
$49.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm
$75.00
Includes: - 1.1mm elite cables (2 x 2300mm) - 4mm reinforced linear strand housing - Ferrules, end caps, frame protectors
Page 1 of 4 Next page